All Professional Industries®
Generator Load Shedding Made Simple!
Hard at work for the Generator Industry...
   

All Professional Industries the Manufacturer of the LOAD SHED A/C™


Generator Load Shedding:

The Load Shed A/C Smart Delay staggers how air conditioning turns on. Whether there are 2 or 24 air conditioners, the Load Shed A/C Smart Delay will Stagger each air conditioner 20 seconds apart, thus lowering the surge needed from a generator, allowing to size down a generator to handle more air conditioning.

The Load Shed A/C™ allows two or more large air conditioners to operate on a generator sized for only one air conditioner. When the utility fails and the transfer switch flips down to generator power, the Load Shed A/C will shut off one air conditioner while allowing the other to operate until the adjustable timer expires. The Load Shed A/C will then allow the second air conditioner to operate on the adjustable timer. When the second timer expires, the process will start over again with the first air conditioner.

 

Save $thousands$ with the Load Shed A/C by reducing the size generator needed to power your air conditioning during an outage.
Load Shed A/C

Provided Functions:

Automatic load reduction to match the generator supply.

Each Load Shed A/C allows for 2 of any size air conditioners to alternate operation with adjustable timers while on a generator automatically. While on utility, both air conditioners operate normally.
As many as 9 Load Shed A/C’s may be connected to each generator system, controlling up to 18 air conditioners at once!

Installation Information:

The Load Shed A/C requires 1 Installation Kit, 1 conduit and 2 low voltage thermostat wires.

  • A control line from the transfer switch to the Load Shed A/C.
  • Thermostat wire – Only 1 wire is needed from each thermostat. That 1 wire from each thermostat is normally closed in utility and opens and closes on two adjustable timers during an outage using the Load Shed A/C on a generator with an automatic transfer switch.

The LOAD SHED A/C PLUS™ has all the same adjustable components as the Load Shed A/C, plus will turn off circuits as large as 100 Amps automatically while on an automatic generator system.

Each Load Shed A/C Plus rotates 2 air conditioners on 2 adjustable timers and turns off any size load up to 100 Amps/600V automatically while on an automatic generator. Use up to 9 Load Shed A/C Plus on one generator system.