Description:

Model 2161

Each LOAD SHED A/C PLUS 30A™ rotates 2 air conditioners on 2 adjustable timers and turns off any size load up to 30 Amps up to 600V automatically while on an automatic generator.
Up to 9 Load Sheds may be connected to each generator system, controlling up to 18 air conditioners and 1 2-pole circuit at once!

The Load Shed A/C Plus is meant to reduce loads to match the generator supply.

Nema 1 Enclosure

Shipping Weight: 9lb's

Dimensions: 10"T x 8"W x 4"D

Installation Information:

The Load Shed A/C Plus requires 2 Installation Kits, 1 conduit and 2 low voltage thermostat wires.

• A control line from the transfer switch to the Load Shed A/C.

• 1-pole or 2-pole circuit that you want off during generator operation.

• Thermostat wire – Only 1 wire is needed from each thermostat. That 1 wire from each thermostat is normally closed in utility and opens and closes on two adjustable timers during an outage using the Load Shed A/C on a generator with an automatic transfer switch.

Load Shed A/C Plus Specifications

Load Shed A/C Plus Install Manual

Load Shed A/C Installation Kit

Load Shed A/C Warranty